Updated November 10, 2026
Johnson County sits on ground that is slightly acidic sandy or sandy-loam soils over Cretaceous Woodbine and Trinity sandstone in the timbers, and thin shallow soils over hard limestone on the prairie. Every fact carries its source; the quote carries the spec.
Subdivisions north, acreage south
Around Burleson and Joshua the work looks like Tarrant County: patio extensions, pool decks and outdoor kitchens behind newer houses, with HOA review and a builder slab to tie into. South toward Cleburne, Alvarado and Grandview it turns to shop and barn slabs, RV pads and long pads on acreage, where the county's development permit applies to any new development and paving and grading count as development.
Rock in one subdivision, sand in the next
Johnson County sits on the Grand Prairie's limestone with the Eastern Cross Timbers crossing it, so a flagstone terrace or a turndown edge can hit rock in one place and dig easily a mile away. A quote with a rock-excavation line, included or excluded in writing, is a quote that has thought about the lot.
What Cross Timbers and Fort Worth Prairie ground means for the spec
Johnson County is Cross Timbers and Fort Worth Prairie country: slightly acidic sandy or sandy-loam soils over Cretaceous Woodbine and Trinity sandstone in the timbers, and thin shallow soils over hard limestone on the prairie. For a stamped or stone surface that means the base and the drainage are not optional lines, and for a shop or RV pad it means the built-up pad is where the money goes first. Ask what is removed, what is placed and compacted, how thick the slab is at the edge, and where the water goes.
Source: Texas Parks & Wildlife, Cross Timbers ecoregion
Johnson County facts the quote accounts for
- Johnson County had an estimated 218,048 residents in July 2025, up from 179,927 in 2020, with 78,009 housing units, 74.7 percent owner-occupied, the lowest median home value of the eight counties on this site. source
- Johnson County Development Services issues development permits for any new development in the unincorporated county before construction begins, defines development as any man-made change to real estate including buildings, grading, paving and excavation, administers the floodplain under a 2019 Flood Damage Prevention Order (fences and walls in the floodplain count), and permits on-site sewage facilities as TCEQ's designated representative. source
- The Central Appraisal District of Johnson County at 109 N. Main Street in Cleburne keeps the parcel records; the Comptroller's directory lists 43 active taxing units. source
- The Texas Almanac runs both the Grand Prairie (a limestone-based area, also called the Fort Worth Prairie) and the Eastern Cross Timbers through Johnson County, so a lot can sit on shallow limestone or sandy loam depending on the side of the county. source
Surfaces and slabs we quote in Johnson County
Stamped concrete patterns
Stamped concrete is a plain slab textured while it is still soft, so the pattern you choose decides most of the look.
See details →
Colored & stained concrete
Concrete takes color four ways: pigment mixed into the batch (integral), a color hardener floated into the surface, a reactive acid stain that changes the top of a cured slab, or a water-based stain or dye that soaks into it.
See details →
Exposed aggregate & broom finishes
Exposed aggregate shows the stone in the concrete by washing the surface paste away before it hardens; broom finish drags a damp broom across floated concrete for a non-slip texture.
See details →
Flagstone & natural stone
Flagstone can be dry-laid on a compacted stone and sand base with sand or polymeric joints, or mortar-set on a reinforced concrete slab with grouted joints.
See details →
Pool decks & coping
A pool deck is a slab that gets wet, hot and barefoot traffic all summer, so the finish has to grip when wet and not bake.
See details →
Outdoor kitchens, fire pits & seating
We handle the concrete and stone: the patio, the pad an island or fireplace sits on, block or stone bases, seat walls and steps.
See details →Questions about concrete in Johnson County
Do I need a permit for concrete work in Johnson County?
Johnson County had an estimated 218,048 residents in July 2025, up from 179,927 in 2020, with 78,009 housing units, 74.7 percent owner-occupied, the lowest median home value of the eight counties on this site. Rules differ by project and address, so the contractor confirms the requirement with Johnson County before quoting and the written quote includes any permit. Source: U.S. Census Bureau QuickFacts.
What soil is under Johnson County, and how does it change a slab?
Johnson County sits in Johnson County on Cross Timbers and Fort Worth Prairie ground, slightly acidic sandy or sandy-loam soils over Cretaceous Woodbine and Trinity sandstone in the timbers, and thin shallow soils over hard limestone on the prairie. On this ground a slab should have a prepared and compacted subgrade, crushed stone, steel set on chairs, thicker edges, tight control joints and drainage that moves water away from the edge. Source: Texas Parks & Wildlife, Cross Timbers ecoregion.
How do I get a written quote in Johnson County?
Send the address and what you want built through the quote form. One local crew visits, then quotes the base, steel, joints and drainage in writing before any concrete is ordered. Each project in Johnson County is quoted on its own site conditions.